The PSATG is a plastic screw anchor that brings an innovative highperformance design to a broad range of applications and substrates, such as fastening bathroom fixtures, window treatments, picture framing and shelving.
The PSATG features "triple-grip" technology with claws on the neck that hold the anchor stationary while inserting the screw. Two expandable wings also provide gripping power, fastening tightly behind the wall for maximum holding power.
MATERIAL
Polyethylene plastic
INSTALLATION
See below.
LINKS:
- Limited Warranty Information
- Documents:
Product Data
Tension and Shear Loads in 1/2" Drywall2,3
- The allowable loads listed are based on a safety factor of 4.0.
- The allowable loads listed are based on single anchor tests.
- The performance of multiple anchors spaced closely together has not been investigated.
Tension and Shear Loads in 2500 psi Normal-Weight Concrete
- The allowable loads listed are based on a safety factor of 4.0.
- The allowable loads listed are based on single anchor tests.
- The performance of multiple anchors spaced closely together has not been investigated.
- Drill a pilot hole into the base material using the appropriate type and size of drill bit
- Insert the PSATG into the hole
- Insert the screw through the fixture and screw into the PSATG
- Turn clockwise until a firm resistance is achieved
Caution: Oversized holes will make it difficult to set the anchor and will impact the anchor's performance
Installation Sequences
