Sure Wall anchors are designed to self-drill into drywall and provide excellent holding value and greater capacity than screws alone. The standard Sure Wall cuts threads into drywall, greatly increasing the bearing surface and strength of the fastening. The Sure Wall Gripper expands behind the drywall, greatly increasing the bearing surface, resulting in higher loads than the standard Sure Wall. The Sure Wall Nylon Toggle has a die-cast, zinc-drilling point that toggles into position to provide the most bearing surface behind the drywall and the highest capacity in the Sure Wall product line.
GALLERY: roll over images below to see larger image
Sure Wall Nylon
Sure Wall
Zinc
Sure Wall Gripper
Sure Wall Nylon Toggle
FEATURES
- Self-Drilling: Only a screwdriver needed for installation in gypsum board drywall
- Standard Sure Wall can be used as a fastener in fixtures with sufficiently large holes
- All designs maximize the load-carrying capacity of gypsum drywall
- New designs include screws with the anchors
MATERIAL
- Sure Wall Standard: Die-cast zinc or reinforced nylon
- Sure Wall Gripper: Reinforced nylon
- Sure Wall Toggle: Reinforced nylon with a die-cast, zinc drilling point/toggle
INSTALLATION
See below.
LINKS:
- Limited Warranty Information
- Documents:
Product Data
Sure Wall Product Data
Sure Wall Gripper Product Data
Sure Wall Nylon Toggle Product Data
Load Data
Sure Wall
Tension and Shear Loads in 1/2" Drywall
- The allowable loads listed are based on a safety factor of 4.0.
- The allowable loads listed are based on single anchor tests.
- The performance of multiple anchors spaced closely together has not been investigated.
Sure Wall Gripper
Tension and Shear Loads in 1/2" Drywall
See notes to left.
Sure Wall Nylon Toggle
Tension and Shear Loads in 1/2" Drywall
See notes to left.
Standard Sure Wall (Nylon or Zinc):
- With the screwdriver inserted in the anchor, push the point of the anchor into the base material to get it started.
- Screw the anchor into the base material, turning clockwise.
- Hold the fixture in place and install the screw (screw is not needed when the fixture hole accepts the Sure Wall anchor).
Standard Sure Wall Installation Sequence
Sure Wall Gripper Installation Sequence
Sure Wall Toggle:
- With the screwdriver inserted in the anchor, screw the tip of anchor into the base material, turning clockwise.
- Stop turning once the tip penetrates through the base material. Turn the anchor so that the arrow on the head of the anchor is pointing up and push the anchor until the head is flush with the surface of the base material.
- Insert the screw into the anchor and push until the screw reaches the back of the anchor.
- Begin turning the screw clockwise to engage the toggle and pull it snug against the backside of the base material.
Sure Wall Toggle Installation Sequence
