The GCN150 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to concrete, steel, CMU and metal deck. The GCN150 has a portable gas fuel supply that does not require electrical cords or hoses. The GCN150 sets up quickly and offers maximum productivity. With a 500 shot-per-hour capacity and a pin jam release door, the GCN150 makes fastening pins fast and easy. Additional attributes include two-step pin loading into the magazine, light and well-balanced weight, a battery indicator light and a sure-grip rubber handle pad.
NEW GDP pins now ICC-ES code listed.
GALLERY: roll over images below to see larger image
GCN150
larger photo
Easy open jam release door
GFC34 fuel cell
(see below)
GDP concrete pins
(see below)
GDPS steel pins
(see below)
GWL-100 Lathing Washer
(see below)
GMR-1 Magnetic Ring
(see below)
FEATURES
- Fast: 40-pin magazine and 1,200-shot fuel cell for reduced loading time
- Easy to use: Automatic piston reset
- Easy open jam release door
- Portable: No hoses, cords, or external energy source required
- Convenient: Simple 2-step pin loading and open-blade guide-jam release
- Easy-load fuel compartment
- No possibility of firing with no pins – when tool is down to last 2 pins in the pin magazine a "lock off" occurs
- Ladder hook
SPECIFICATIONS
- Tool dimensions: Length – 17.3", Width – 4.2",
Height – 15.3" - Weight: 8.3 lbs
- Magazine capacity: 42
- Average number of fastens per fuel cell: 1,200
- Average number of fastens per battery charge: 3,300
- Average battery charge time: 2 hours
- Fastener type: Length – 1/2" to 1 1/2",
Diameter – .102" to .109"
KEY FASTENING APPLICATIONS
- Drywall track to concrete, steel, CMU or metal deck
- Furring strips to concrete, steel or CMU
- Plywood to concrete, steel or CMU
- Angle track to concrete, steel or metal deck
TOOL IS SOLD IN A RUGGED FIXTURED TOOL BOX AND INCLUDES:
- 2 Batteries
- 1 Charger
- Safety glasses
- Ear protection
- Operators manual
- Tool schematic
- Tool cleaning instructions
Replacement Parts
LINKS:
- Limited Warranty Information
- Fastener Tension and Shear Load Values
- Documents:
- Anchor Catalog Section (PDF)
- Operator's Manual (PDF)
- Parts Reference Guide (PDF)
- NEWProduct Submittal Generator
- Tool Cleaning Guide (PDF)
- GCN150 Gas-Actuated Concrete Nailer Flier (PDF)
- Safety Warning for the GCN150 Gas-Actuated Concrete Nailer (PDF)
- Material Safetly Data Sheets:
Gas Concrete Nailer Fuel Cell (PDF)
Gas Concrete Nailer Fuel Cell en Español (PDF)
Gas Concrete Nailer Fuel Cell en Français (PDF)
Gas Concrete Nailer Tool Cleaner (PDF)
Gas Concrete Nailer Tool Cleaner en Español (PDF)
Gas Concrete Nailer Tool Cleaner en Français (PDF)
Gas Concrete Nailer Tool Oil Lubricant (PDF)
Gas Concrete Nailer Tool Oil Lubricant en Español (PDF)
Gas Concrete Nailer Tool Oil Lubricant en Françai (PDF)
RELATED PRODUCTS / ACCESSORIES
- GFC34 Fuel Cell
- Compatible Fasteners:
GDP Concrete Pins
GDPS Steel Pins
GDPSK Spiral Knurl Pins - GWL-100 Lathing Washer and GMR-1 Magnetic Ring
GFC34The GFC34 fuel cell is designed to operate with the GCN150 and GCN-MEP Gas-Actuated Concrete Nailers and also works with many major brand gas concrete-nailer tools. The fuel cell provides 1,200 shots and can operate at temperatures between 20°–120°F (-6°–49°C). The fuel cells are offered in a 2-per-pack clamshell. Additionally, one fuel cell is included with each pack of 1,000 pins.
Gas Fuel Cells
TrackFast®
is a registered trademark of ITW.
Track-It®
is a registered trademark of Powers.
GDPU.S. Patent 605016
GDP CONCRETE PINS
GDP concrete pins are designed to work with the GCN150 and GCN-MEP (with magazine attached) gas-actuated concrete nailer tools as well as with most major brand gas concrete-nailer tools. The 10-fastener patented strip is designed with break-away plastic. The pins are designed for use in A36, A572 and A992 steel, concrete and CMU block.
Code Reports: ICC-ES ESR-2811 (PDF); City of Los Angeles RR25837 (PDF); Florida Statewide Product Approval FL11506.2
GDP Product Data
.106 Diameter Shank Drive Pins for the GCN150
GDPSGDPS STEEL PINS
The GDPS pins are designed to work in the GCN150 and GCN-MEPMAG gas-actuated nailer tools for installation into A36, A572 Grade 50 and A992 structural steel. The step-shank pin, with smaller-diameter tip, facilitates easier penetration into the steel, while the larger diameter upper shank provides more shear resistance and successful installation.
Code Reports: ICC-ES ESR-2811 (PDF)
GDPS Product Data
.106 Diameter Shank Drive Pins for the GCN150
GDPSKGDPSK Spiral Knurl Gas Pins
GDPSK gas pins are designed for attaching plywood and OSB to cold-formed steel studs. The spiral knurl provides a positive lock and resists back out. Installed with the GCN150 concrete nailer or GCN-MEP (with magazine) concrete nailers, the GDPSK-138 gas pin provided faster installation and set up times, which contributes to lower labor costs. The hardened pins quickly and cleanly pierce the cold-form steel and leave the pin head flush with the wood fixture. The 1 3/8" length pin can be used for 1/2"–3/4" thick plywood, and 14–22 gauge steel.
Spiral Knurl Gas Pins
.110 Diameter Shank, .25" diameter Head, for the GCN150
or GCN-MEP with magazine
GWL-100 Lathing Washer and GMR-1 Magnetic Ring
The GWL-100 lathing washer is used with the GCN150 tool and attaches lath to the wall surface for overlaying scratch coats, brown coats and stucco. The washers are held onto the nose of the tool with the GMR-1 magnetic ring and are attached to the substrate (including concrete and CMU) with GDP pins, which fasten through the washer. No extra tools are needed to install the magnetic ring to the nosepiece of the tool.
Lathing Washer and Magnetic Ring
Lathing Washer and Magnetic Rings are sold seperately.
