 |
HTT4 and HTT5 Tension Ties
The HTT series of tension ties offers tension-resisting solutions that install with
screws. These new additions to the HTT line feature an optimized fastener pattern
which results in better performance with less deflection. Designed to meet new code
standards, the HTT4 and HTT5 offer higher loads than the S/HTT14.
> more info
|
|
|
 |
|
|
LCE4 Column Cap
The universal design of the LCE provides high capacity while eliminating the need for
left and right versions. For use with multiple header thicknesses.
> more info |
|
|
 |
|
|
AHEP Adjustable Hip-End Purlin
The AHEP adjustable purlin is a structural purlin that also serves as an installation
aid during the truss erection process. It attaches to the step-down hip trusses at the
leading edge eliminating the need for drop-top chords and C-stud fillers. Designed to
accommodate a roof-pitch range of 3/12 to 9/12, the AHEP installs linearly, aligned
with the end jacks, to maintain sheathing spacing from eave to hip or peak.
> more info |
 |
|
|
|
S/VGT Variable Girder Tiedown
The S/VGT tiedown is a higher capacity tiedown for girder trusses. It attaches with screws to the side of the truss and features a predeflected crescent washer that allows it to accommodate top chord pitches up to 8/12.
> more info
|
|
|
 |
|
|
S/BA Cold-Formed Steel Hanger
The S/BA top-flange hanger is a cost-effective alternative to heavier, special-order hangers. The S/BA is value engineered and tested to achieve higher allowable loads and increased performance. It may be fastened with screws or powder-actuated fasteners or welded to the header, providing more design options and greater versatility..
> more info
|
|
|
 |
|
|
H10S Hurricane Tie
The H10S hurricane tie provides a high-capacity connection from the truss/rafter to
the stud or masonry. A flexible fastening pattern allows installation where the stud
is offset.
more info:
> for Steel-to-Steel
> for Wood Truss or Joist-to-CFS Wall
|
 |
|
|
|
S/TSR Truss Spacer Restraint
The S/TSR truss spacer restraint captures the on-center spacing of cold-formed steel truss chords and webs in linear alignment. The S/TSR laterally restrains the truss members, allowing quicker, easier and safer installations. Its tubular shape provides strength in both compression and tension. S/TSR has a low profile that can be sheathed over, eliminating the need to remove bracing prior to applying the sheathing or decking. Available June 2010.
> more info
|
|
|
 |
|
|
Strong Frame® Ordinary Moment Frame
The Strong Frame ordinary moment frame is a cost-effective alternative to traditional frames, which are time intensive to design and labor intensive to install. The Strong Frame ordinary moment frame allows larger openings and smaller wall sections while still providing the loads that structural designers need. Simpson Strong-Tie offers 196 pre-designed solutions and 100% bolted connections to make building with moment frames more convenient than ever.
> more info
|
|
|
 |
|
|
TBD22 Truss Brace
Everything about the new TBD truss brace is designed to make diagonal truss bracing easier. It travels in a box like a coiled strap and is formed into shape as it is pulled from the carton, making it rigid and easy to position across trusses. Once fastened into place, the braces lay flat so that they remain in place as the roof is sheathed, eliminating the need to remove braces. And since the braces stay in place, trusses maintain better alignment and are safer for sheathing crews to work on.
> more info
|
|
|
 |
|
|
LTA2 Lateral Truss Anchor
The new LTA2 is an embedded truss anchor
for grouted CMU and concrete walls that
develops high loads with shallow embedment. Its simplified design of the embedded
portion allows for easy positioning
close to rebar, and is ideal for anchoring trusses running
perpendicular or parallel to the wall.
> more info
|
 |
|
 |
|
|
SCB Bypass Framing Slide-Clip Connector
The SCB bypass framing slide-clip connector is a time-saving, high-performance slide clip that accommodates a variety of steel stud sizes. Designed for bypass framing applications, the SCB slide-clip connector simplifies design and detailing for the Designer and reduces field and material costs by eliminating the need for two parts to accommodate large stand-offs. This clip provides a full 1" of both upward and downward movement.
> more info
|
|
 |
|
|
SCW Head-of-Wall Slide-Clip Connector
Primarily used in head-of-wall applications that require vertical movement relative to the structure, the SCW slide-clip connector is also used to strengthen window and door jambs for projects that utilize slip-track. The SCW slide-clip connector provides a full 1" of both upward and downward movement.
> more info
|
|
 |
|
|
SSB Bypass Framing Slide-Clip Strut Connector
This versatile strut connector is commonly used at the bottom of a steel beam to accommodate large stand-off conditions. With anchor holes positioned along the entire length of the part, a single part can accommodate a range of standoff distances. And with slots located at each end, no lefts and right are required. The SSB slide-clip connector provides a full 1" of both upward and downward movement.
> more info
|
|
 |
|
|
FCB Bypass Framing Fixed-Clip Connector
An economical, high-performance fixed-clip connector that can be used for a variety of framing applications, the FCB fixed-clip connector is rated for tension, compression and shear loads. It offers Designers the flexibility of specifying different screw and anchorage patterns that conform to desired load levels.
> more info
|
|
 |
|
|
S/DTT2Z Tension Tie for
Cold-Formed Steel
Framed Shearwalls
The S/DTT2Z is a cost-effective tension-tie solution
suitable for light-duty holdown applications for
cold-formed steel (CFS) stud shearwalls. It is fastened
to the stud with standard #14 self-drilling screws and
depending on the application can be secured to the
foundation using a variety of Simpson Strong-Tie®
products.
> more info
|
|
 |
|
|
SUBH/MSUBH Bridging Connectors for Cold-Formed Steel Stud Construction
Our latest innovation for cold-formed steel construction
is the new Simpson Strong-Tie® SUBH wall-stud bridging
connector. It requires only one screw for most installations,
reducing the installed cost over conventional clip-angle
connections that require four screws. The SUBH connector
features a unique geometry that grabs the stud web and fits
snug over 1.5" U-channel, enabling superior rotational and
pull-through resistance. It is self stabilizing and does not
require an extra hand or C-clamps to hold the connector
while a screw is being driven. The SUBH connector is the only
bridging connector/device that has been extensively tested as
a system so that the tabulated design values reflect stud web
size and thickness. The SUBH can be used with a wide range
of stud sizes and gauges.
> more info
|
 |
|
|
#14 x 1" Self-Drilling Screws for Cold-Formed Steel Framing
Simpson Strong-Tie is committed to expanding our connector and fastener
product line for cold-formed steel framing. The new #14 x 1" self-drilling
structural screw is designed for steel-framing applications and for use with
a wide variety of Simpson Strong-TieŽ connectors.
> more info
|
 |
|
|
|
USA / Canada | Change Location...
