• Load Table
• Gallery of images
• Code Reports
• Drawings
• Catalog Page
• Anchoring Solutions
• Related Categories
• Technical Bulletins
• Fliers
• Featured Literature
• Help for downloads

The DTT2 is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2 also complies with the new IRC requirements for laterally tying the deck to the house. Additionally, the versatile DTT2 is load rated as a holdown for light-duty shearwalls and braced wall panel applications. The DTT2 fastens easily to a single 2x joist or stud using Simpson Strong-Tie® Strong-Drive® SDS screws (included) and accepts a 1/2" machine bolt or anchor bolt.

The new DTT2SS is made from stainless steel for applications in higher exposure environments. Whether it's a deck guardrail post application or the lateral-load connection from the deck to the adjacent structure, the new stainless-steel DTT2 is the best choice for seaside applications or those calling for more corrosive preservative-treated lumber formulations. It fastens to the framing members with stainless-steel Simpson Strong-Tie Strong-Drive SDS wood screws (included).

The new DTT2Z-SDS2.5 is our standard DTT2Z packaged with 2 1/2" Simpson Strong-Tie Strong-Drive SDS wood screws instead of the standard 1 1/2" fasteners. These longer screws allow the DTT2Z to achieve a load capacity in excess of 2100 lbs. when used as a holdown on double studs in a shearwall application. The DTT2Z-SDS2.5 is also suitable in deck applications when double 2x members are used for deck joists or blocking.

Material: DTT2Z/DTT2SS—14 gauge

Finish: DTT2Z—ZMAX® coating; DTT2SS—Stainless steel; see Corrosion Information.

Installation:

• Use all specified fasteners. See General Notes.
• A standard cut washer (refer to General Notes) must be installed between the nut and the seat.
• Simpson Strong-Tie SDS screws install best with a low speed high torque drill with a 3/8" hex head driver.