HFN/F Panelized Construction Hangers

The HF24N, HF26N, HF34N and HF36N hangers are designed for panels or components using jigs or similar devices for precision fabrication. Grip-groove feature provides positive lock into the 2x or 3x member without nailing. F series panel hangers are engineered components for panelized construction only.

F26P Discontinued in 2012
The F26P is being phased out in 2012 and will no longer be available after December, 2012. Please use the HF26N as a replacement. See information on the HF26N below.

Material: 18 gauge

Finish: Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation:

Standard Installation:

Use all specified fasteners.See General Notes.
On the F-series hanger, the seat nail is non-structural and does not contribute to the load.
For additional information on retrofit options see flier F-RUZNRUZ.

Alternate Installation:

In panelized construction, it is acceptable to nail through the sheathing into the hanger's top flange using one 10dx2 1/8" nail placed in the middle third of the top flange, no closer than 1/4" from the back edge of the hanger. See T-HFHANGER for additional information.

roll over images below to see larger image


HF24N (HF34N similar) U.S. Patent 6,260,402	HF26N (HF36N similar) Dimples hold joist securely in place. U.S. Patent 6,260,402	F26P	Typical HF24N Installation (HF34N similar) Support member not shown for clarity


HF Alternate Installation (Plan View)	Typical Hybrid Panelized Roof System	Double HF26N Nailer Installation on Hybrid Truss

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

10d common nails can be used for specified 10dx2 1/8 nails.
HF hangers may be installed with a single 10dx2 1/8 nail installed through the 1/2" OSB or plywood through the middle third of the top flange with reduced loads (see drawing).
See T-HFHANGER for additional applications and loads.
NAILS: 10d = 0.148" dia. x 3" long, 10dx2 1/8 = 0.148" dia. x 2 1/8" long.
See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
F24-2		ESR-2607 / ESR-2523 *	RR25719
F24-2Z		ESR-2607 / ESR-2523 *	RR25719
F26-2		ESR-2607 / ESR-2523 *	RR25719
F26-2Z		ESR-2607 / ESR-2523 *	RR25719
F26P		ESR-2607 / ESR-2523 *	RR25719
F44		ESR-2607 / ESR-2523 *	RR25719
F44Z		ESR-2607 / ESR-2523 *	RR25719
F46		ESR-2607 / ESR-2523 *	RR25719
F46Z		ESR-2607 / ESR-2523 *	RR25719
HF24N		ESR-2607 / ESR-2523 *	RR25719
HF24NZ		ESR-2607 / ESR-2523 *
HF26N		ESR-2607 / ESR-2523 *	RR25719
HF26NZ		ESR-2607 / ESR-2523 *
HF34N		ESR-2607 / ESR-2523 *	RR25719
HF34NZ		ESR-2607 / ESR-2523 *
HF36N		ESR-2607 / ESR-2523 *	RR25719
HF36NZ		ESR-2607 / ESR-2523 *
HFN	See specific model numbers for code listings.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
F24-2	None for this model	None for this model
F24-2Z	None for this model	None for this model
F26-2	None for this model	None for this model
F26-2Z	None for this model	None for this model
F26P	F26P: DWG \| DXF F26P front view: DWG \| DXF F26P right view: DWG \| DXF F26P top view: DWG \| DXF	None for this model
F44	F44: DWG \| DXF F44 front view: DWG \| DXF F44 right view: DWG \| DXF F44 top view: DWG \| DXF	None for this model
F44Z	None for this model	None for this model
F46	F46: DWG \| DXF F46 front view: DWG \| DXF F46 right view: DWG \| DXF F46 top view: DWG \| DXF	None for this model
F46Z	None for this model	None for this model
HF24N	HF24N: DWG \| DXF HF24N front view: DWG \| DXF HF24N right view: DWG \| DXF HF24N top view: DWG \| DXF	HF24N: DWG \| DXF
HF24NZ	None for this model	None for this model
HF26N	HF26N: DWG \| DXF HF26N front view: DWG \| DXF HF26N right view: DWG \| DXF HF26N top view: DWG \| DXF	None for this model
HF26NZ	None for this model	None for this model
HF34N	HF34N: DWG \| DXF HF34N front view: DWG \| DXF HF34N right view: DWG \| DXF HF34N top view: DWG \| DXF	None for this model
HF34NZ	None for this model	None for this model
HF36N	HF36N: DWG \| DXF HF36N front view: DWG \| DXF HF36N left view: DWG \| DXF HF36N right view: DWG \| DXF HF3N6 top view: DWG \| DXF	None for this model
HF36NZ	None for this model	None for this model
HFN	None for this model	None for this model