HL Heavy Angles and Gussets

Versatile angle gussets and heavy angles promote standardization and construction economy, and are compatible with Strong-Tie structural hardware.

Finish: 7 ga Models—Galvanized; 3 ga Models—Simpson Strong-Tie® gray paint.

Options:Gussets may be added to HL models when L ≥ 5" (specify G after model number, as in HL46G).

roll over images below to see larger image

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

Allowable loads have been increased 60% for wind or earthquake loading. No further increase allowed; reduce where other loads govern.
Use 0.85 times table load for Hem Fir.
Parts should be centered on the face of the member to which they are attached.
Wood members for the '3' and '5' series must have a minimum width and thickness of 3 1/2" for table loads to apply.
Wood members for the '4' and ‘7' series must have a minimum width and thickness of 5 1/8" for table loads to apply.
Parts must be used in pairs.
Lag bolts of equal diameter (minimum 5" long) may be substituted for machine bolts into beam with no reduction in load.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
HL33	No code listing: Please contact us for test data.
HL35	No code listing: Please contact us for test data.
HL37	No code listing: Please contact us for test data.
HL43	No code listing: Please contact us for test data.
HL46	No code listing: Please contact us for test data.
HL49	No code listing: Please contact us for test data.
HL53	No code listing: Please contact us for test data.
HL55	No code listing: Please contact us for test data.
HL57	No code listing: Please contact us for test data.
HL73	No code listing: Please contact us for test data.
HL76	No code listing: Please contact us for test data.
HL79	No code listing: Please contact us for test data.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
HL33	HL33: DWG \| DXF HL33 front view: DWG \| DXF HL33 right view: DWG \| DXF HL33 top view: DWG \| DXF	None for this model
HL35	HL35: DWG \| DXF HL35 front view: DWG \| DXF HL35 right view: DWG \| DXF HL35 top view: DWG \| DXF	None for this model
HL37	None for this model	None for this model
HL43	None for this model	None for this model
HL46	None for this model	None for this model
HL49	None for this model	None for this model
HL53	HL53: DWG \| DXF HL53 front view: DWG \| DXF HL53 right view: DWG \| DXF	None for this model
HL55	HL55: DWG \| DXF HL55 front view: DWG \| DXF HL55 right view: DWG \| DXF HL55 top view: DWG \| DXF	None for this model
HL57	None for this model	None for this model
HL73	None for this model	None for this model
HL76	None for this model	None for this model
HL79	None for this model	None for this model