LSU/LSSU/LSSUI Light Slopeable/Skewable U Hangers for I-Joists and SCL

This series attaches joists or rafters to headers, sloped up or down, and skewed left or right, up to 45°.

Installation

View step-by-step installation instructions

Material: See table.

Finish: Galvanized

Installation:

Use all specified fasteners. See General Notes.
Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members.
Web stiffeners required for I-joist applications.
Watch an installation video.

roll over images below to see larger image

LSSU410
(LSSU210-2, LSSUH310 similar)

The LSU5.12 must be factory- skewed 0° to 45°. It may be field-sloped to 45°.
(LSU4.12, LSU4.28 and LSU3510-2 similar)

Hanger shown skewed right

top LSSU Installation Sequence
(For Skewed or Sloped/Skewed Applications)

roll over images below to see larger image


Step 1 Nail hanger to slope-cut carried member, installing seat nail first. No bevel necessary. Install joist nails at 45° angle.	Step 2 Skew flange from 0-45°. Bend other flange back along centerline of slots until it meets the header. Bend one time only.	Step 3 Attach hanger to the carrying member, acute angle side first (see footnote 5). Install nails at an angle.

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

Roof loads are 125% of floor loads unless limited by other criteria.
Uplift loads include a 33% and 60% increase for wind or earthquake loading; no further increase is allowed; reduce where other loads govern.
LSU3510-2, LSU4.12, LSU4.28 and LSU5.12 skew option must be factory-ordered.
Minimum 11" joist height for LSU3510-2, LSU4.12, LSU5.12; 9 1/2" for all others.
For skewed LSSU/LSSUI hangers, the inner most face fasteners on the acute angle side are not installed.
Do not substitute 10dx1 1/2" nails for face nails on slope and skew combinations or skewed only LSU, LSSU and LSSUI.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
LSSU2.1	No code listing: Please contact us for test data.
LSSU210		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSU210-2		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSU410		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSUH310	No code listing: Please contact us for test data.
LSSUI2.06	No code listing: Please contact us for test data.
LSSUI25		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSUI35		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSU3510-2	No code listing: Please contact us for test data.
LSU4.12	No code listing: Please contact us for test data.
LSU4.28	No code listing: Please contact us for test data.
LSU5.12	No code listing: Please contact us for test data.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
LSSU2.1	LSSU2.1: DWG \| DXF LSSU2.1 front view: DWG \| DXF LSSU2.1 left view: DWG \| DXF LSSU2.1 right view: DWG \| DXF	None for this model
LSSU210	LSSU210: DWG \| DXF LSSU210 front view: DWG \| DXF LSSU210 left view: DWG \| DXF LSSU210 right view: DWG \| DXF LSSU210 top view: DWG \| DXF	LSSU210: DWG \| DXF
LSSU210-2	LSSU210-2: DWG \| DXF LSSU210-2 front view: DWG \| DXF LSSU210-2 left view: DWG \| DXF LSSU210-2 right view: DWG \| DXF	None for this model
LSSU410	LSSU410: DWG \| DXF LSSU410 front view: DWG \| DXF LSSU410 left view: DWG \| DXF LSSU410 right view: DWG \| DXF	None for this model
LSSUH310	LSSUH310: DWG \| DXF LSSUH310 front view: DWG \| DXF LSSUH310 left view: DWG \| DXF LSSUH310 right view: DWG \| DXF	None for this model
LSSUI2.06	None for this model	None for this model
LSSUI25	LSSUI25: DWG \| DXF LSSUI25 front view: DWG \| DXF LSSUI25 left view: DWG \| DXF LSSUI25 right view: DWG \| DXF	None for this model
LSSUI35	LSSUI35: DWG \| DXF LSSUI35 front view: DWG \| DXF LSSUI35 left view: DWG \| DXF LSSUI35 right view: DWG \| DXF	None for this model
LSU3510-2	None for this model	None for this model
LSU4.12	LSU4.12: DWG \| DXF LSU4.12 skewed left: DWG \| DXF LSU4.12 skewed right: DWG \| DXF LSU4.12 front view: DWG \| DXF LSU4.12 skewed left front view: DWG \| DXF LSU4.12 skewed right front view: DWG \| DXF LSU4.12 left view: DWG \| DXF LSU4.12 skewed right left view: DWG \| DXF LSU4.12 right view: DWG \| DXF LSU4.12 skewed left right view: DWG \| DXF LSU4.12 skewed left top view: DWG \| DXF LSU4.12 skewed right top view: DWG \| DXF LSU4.12 top view: DWG \| DXF	LSU412: DWG \| DXF
LSU4.28	None for this model	None for this model
LSU5.12	LSU5.12: DWG \| DXF LSU5.12 front view: DWG \| DXF LSU5.12 right view: DWG \| DXF LSU5.12 top view: DWG \| DXF	None for this model