SUR/SUL/HSUR/HSUL Skewed 45° Hangers for I-Joist & SCL

SUL2.56/11

Typical SUR Installation with Square Cut Joist
(HSUR similar)

Typical SUL
Installation with Bevel Cut Joist
(HSUL similar)

HSULC
Available for 3" and 3 1/2"
wide joists only

HSUR4.12/9

Typical HSUR4.12/9
Installation

The SUR/L1.81, 2.06, 2.1, 2.37, 2.56 and HSUR/L series are 45° skewed hangers designed specifically to ease the installation of single and double I-joists. In addition to Positive Angle Nailing these hangers encapsulate the top flange of the I-joist, so no web stiffeners are required for standard installation.

The full range of 45° skewed hangers feature obround nail holes on the acute side allowing nails to be easily installed parallel to the joist. Installation is further simplified with no required bevel cuts.

Material: See table.

Finish: Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation:

Use all specified fasteners. See General Notes.
Illustrations show left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
The joist end may be square cut or bevel cut.
Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity (see footnote 2).
For I-joists with flanges less than 1 5/16", web stiffeners are required for all double joist hangers when using hangers that are 14 gauge and lighter.
See Installations to masonry or concrete.

Options:

These hangers will normally accommodate a 40° to 50° skew.
Available with the A₂ flange turned in on 2-2x and 4x models only (see illustration). For example, specify HSURC410, HSULC410, SURC210-2, or SULC210-2.

roll over images below to see larger image

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

Uplift loads have been increased for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
Triangle nail holes may be filled (requires web stiffeners) with 10dx1 1/2" nails for additional uplift.
• SUR/SUL 9- and 11-inch and all HSUR/HSUL models have (4) additional holes, that when filled can resist 795 lbs. for Douglas Fir or Southern Pine or 685 lbs. for SPF/HF.
• SUR/SUL 14-inch models have (6) additional holes, that when filled can resists 1190 lbs. for DF/SP and 1025 lbs. for SPF/HF.
When the supported member is an I-joist with flanges less than 1 5/16 inches thick, the allowable uplift shall not exceed 190 lbs. without web stiffeners.
Allowable downloads are based on a joist bearing capacity of 750 psi.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
HSUL	See specific model numbers for code listings.
HSUL210-2		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
HSUL214-2		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
HSUL4.12/11	No code listing: Please contact us for test data.
HSUL4.12/14	No code listing: Please contact us for test data.
HSUL4.12/16	No code listing: Please contact us for test data.
HSUL4.12/9	No code listing: Please contact us for test data.
HSUL4.28/11	No code listing: Please contact us for test data.
HSUL4.28/11	No code listing: Please contact us for test data.
HSUL4.28/9	No code listing: Please contact us for test data.
HSUL4.75/11	No code listing: Please contact us for test data.
HSUL4.75/14	No code listing: Please contact us for test data.
HSUL4.75/16	No code listing: Please contact us for test data.
HSUL4.75/9	No code listing: Please contact us for test data.
HSUL410		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUL414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUL5.12/11	No code listing: Please contact us for test data.
HSUL5.12/14	No code listing: Please contact us for test data.
HSUL5.12/16	No code listing: Please contact us for test data.
HSUL5.12/9	No code listing: Please contact us for test data.
HSULC	See specific model numbers for code listings.
HSULC210-2		ESR-2549 / ESR-2523 *
HSULC210-2Z		ESR-2549 / ESR-2523 *
HSULC214-2		ESR-2549 / ESR-2523 *
HSULC26-2		ESR-2549 / ESR-2523 *
HSULC410		ESR-2549 / ESR-2523 *
HSULC410Z		ESR-2549 / ESR-2523 *
HSULC414		ESR-2549 / ESR-2523 *
HSULC46		ESR-2549 / ESR-2523 *
HSULC46Z		ESR-2549 / ESR-2523 *
HSUR	See specific model numbers for code listings.
HSUR210-2		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
HSUR214-2		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
HSUR4.12/11	No code listing: Please contact us for test data.
HSUR4.12/14	No code listing: Please contact us for test data.
HSUR4.12/16	No code listing: Please contact us for test data.
HSUR4.12/9	No code listing: Please contact us for test data.
HSUR4.28/11	No code listing: Please contact us for test data.
HSUR4.28/11	No code listing: Please contact us for test data.
HSUR4.28/9	No code listing: Please contact us for test data.
HSUR4.75/11	No code listing: Please contact us for test data.
HSUR4.75/14	No code listing: Please contact us for test data.
HSUR4.75/16	No code listing: Please contact us for test data.
HSUR4.75/9	No code listing: Please contact us for test data.
HSUR410		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUR414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUR5.12/11	No code listing: Please contact us for test data.
HSUR5.12/14	No code listing: Please contact us for test data.
HSUR5.12/16	No code listing: Please contact us for test data.
HSUR5.12/9	No code listing: Please contact us for test data.
HSURC	See specific model numbers for code listings.
HSURC210-2		ESR-2549 / ESR-2523 *
HSURC210-2Z		ESR-2549 / ESR-2523 *
HSURC214-2		ESR-2549 / ESR-2523 *
HSURC26-2		ESR-2549 / ESR-2523 *
HSURC410		ESR-2549 / ESR-2523 *
HSURC410Z		ESR-2549 / ESR-2523 *
HSURC414		ESR-2549 / ESR-2523 *
HSURC46		ESR-2549 / ESR-2523 *
HSURC46Z		ESR-2549 / ESR-2523 *
SUL	See specific model numbers for code listings.
SUL1.81/11		ESR-2552 / ESR-2523 *	RR25801
SUL1.81/14	No code listing: Please contact us for test data.
SUL1.81/9		ESR-2552 / ESR-2523 *	RR25801
SUL2.06/11		ESR-2552 / ESR-2523 *	RR25801
SUL2.06/11		ESR-2552 / ESR-2523 *	RR25801
SUL2.06/9		ESR-2552 / ESR-2523 *	RR25801
SUL2.1/11		ESR-2552 / ESR-2523 *	RR25801
SUL2.1/11		ESR-2552 / ESR-2523 *	RR25801
SUL2.1/9		ESR-2552 / ESR-2523 *	RR25801
SUL2.37/11		ESR-2552 / ESR-2523 *	RR25801
SUL2.37/14	No code listing: Please contact us for test data.
SUL2.37/14	No code listing: Please contact us for test data.
SUL2.37/9		ESR-2552 / ESR-2523 *	RR25801
SUL2.56/11		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801
SUL2.56/14	No code listing: Please contact us for test data.
SUL2.56/14	No code listing: Please contact us for test data.
SUL2.56/9		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801
SUL210		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
SUL210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL214		ESR-2549 / ESR-2523 *	RR25801 / RR25801 / RR25807	FL10655
SUL214-2	No code listing: Please contact us for test data.
SUL310		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL314		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL410		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801	FL10655 / FL10531
SULI2.06/9		ESR-2552 / ESR-2523 *	RR25801	FL10531
SULI3510/12		ESR-2552 / ESR-2523 *	RR25801	FL10531
SULI3514/20		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR	See specific model numbers for code listings.
SUR1.81/11		ESR-2552 / ESR-2523 *	RR25801
SUR1.81/14	No code listing: Please contact us for test data.
SUR1.81/9		ESR-2552 / ESR-2523 *	RR25801
SUR2.06/11		ESR-2552 / ESR-2523 *	RR25801
SUR2.06/11		ESR-2552 / ESR-2523 *	RR25801
SUR2.06/9		ESR-2552 / ESR-2523 *	RR25801
SUR2.1/11		ESR-2552 / ESR-2523 *	RR25801
SUR2.1/11		ESR-2552 / ESR-2523 *	RR25801
SUR2.1/9		ESR-2552 / ESR-2523 *	RR25801
SUR2.37/11		ESR-2552 / ESR-2523 *	RR25801
SUR2.37/14	No code listing: Please contact us for test data.
SUR2.37/14	No code listing: Please contact us for test data.
SUR2.37/9		ESR-2552 / ESR-2523 *	RR25801
SUR2.56/11		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801
SUR2.56/14	No code listing: Please contact us for test data.
SUR2.56/14	No code listing: Please contact us for test data.
SUR2.56/9		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801
SUR210		ESR-2549 / ESR-2523 *	RR25801 / RR25807	FL10655
SUR210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR214		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR214-2	No code listing: Please contact us for test data.
SUR310		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR314		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR410		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
SURI2.06/9		ESR-2552 / ESR-2523 *	RR25801	FL10531
SURI3510/12		ESR-2552 / ESR-2523 *	RR25801	FL10531
SURI3514/20		ESR-2552 / ESR-2523 *	RR25801	FL10531

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
HSUL	None for this model	None for this model
HSUL210-2	None for this model	None for this model
HSUL214-2	None for this model	None for this model
HSUL4.12/11	HSUL4.12/11: DWG \| DXF HSUL4.12/11 front view: DWG \| DXF HSUL4.12/11 right view: DWG \| DXF HSUL4.12/11 top view: DWG \| DXF	None for this model
HSUL4.12/14	HSUL4.12/14: DWG \| DXF HSUL4.12/14 front view: DWG \| DXF HSUL4.12/14 right view: DWG \| DXF HSUL4.12/14 top view: DWG \| DXF	None for this model
HSUL4.12/16	HSUL4.12/16: DWG \| DXF HSUL4.12/16 front view: DWG \| DXF HSUL4.12/16 right view: DWG \| DXF HSUL4.12/16 top view: DWG \| DXF	None for this model
HSUL4.12/9	HSUL4.12/9: DWG \| DXF HSUL4.12/9 front view: DWG \| DXF HSUL4.12/9 right view: DWG \| DXF HSUL4.12/9 top view: DWG \| DXF	None for this model
HSUL4.28/11	HSUL4.28/11: DWG \| DXF HSUL4.28/11 front view: DWG \| DXF HSUL4.28/11 right view: DWG \| DXF HSUL4.28/11 top view: DWG \| DXF	None for this model
HSUL4.28/9	None for this model	None for this model
HSUL4.75/11	HSUL4.75/11: DWG \| DXF HSUL4.75/11 front view: DWG \| DXF HSUL4.75/11 right view: DWG \| DXF HSUL4.75/11 top view: DWG \| DXF	None for this model
HSUL4.75/14	HSUL4.75/14: DWG \| DXF HSUL4.75/14 front view: DWG \| DXF HSUL4.75/14 right view: DWG \| DXF HSUL4.75/14 top view: DWG \| DXF	None for this model
HSUL4.75/16	HSUL4.75/16: DWG \| DXF HSUL4.75/16 front view: DWG \| DXF HSUL4.75/16 right view: DWG \| DXF HSUL4.75/16 top view: DWG \| DXF	None for this model
HSUL4.75/9	HSUL4.75/9: DWG \| DXF HSUL4.75/9 front view: DWG \| DXF HSUL4.75/9 right view: DWG \| DXF HSUL4.75/9 top view: DWG \| DXF	None for this model
HSUL410	HSUL410: DWG \| DXF HSUL410 front view: DWG \| DXF HSUL410 right view: DWG \| DXF HSUL410 top view: DWG \| DXF	None for this model
HSUL414	None for this model	None for this model
HSUL5.12/11	None for this model	None for this model
HSUL5.12/14	None for this model	None for this model
HSUL5.12/16	None for this model	None for this model
HSUL5.12/9	None for this model	None for this model
HSULC	None for this model	None for this model
HSUR	None for this model	None for this model
HSUR210-2	None for this model	None for this model
HSUR214-2	None for this model	None for this model
HSUR4.12/11	HSUR4.12/11: DWG \| DXF HSUR4.12/11 front view: DWG \| DXF HSUR4.12/11 top view: DWG \| DXF	None for this model
HSUR4.12/14	HSUR4.12/14: DWG \| DXF HSUR4.12/14 front view: DWG \| DXF HSUR4.12/14 top view: DWG \| DXF	None for this model
HSUR4.12/16	HSUR4.12/16: DWG \| DXF HSUR4.12/16 front view: DWG \| DXF HSUR4.12/16 top view: DWG \| DXF	None for this model
HSUR4.12/9	HSUR4.12/9: DWG \| DXF HSUR4.12/9 front view: DWG \| DXF HSUR4.12/9 top view: DWG \| DXF	None for this model
HSUR4.28/11	HSUR4.28/11: DWG \| DXF HSUR4.28/11 front view: DWG \| DXF HSUR4.28/11 left view: DWG \| DXF HSUR4.28/11 top view: DWG \| DXF	None for this model
HSUR4.28/9	None for this model	None for this model
HSUR4.75/11	HSUR4.75/11: DWG \| DXF HSUR4.75/11 front view: DWG \| DXF HSUR4.75/11 top view: DWG \| DXF	None for this model
HSUR4.75/14	HSUR4.75/14: DWG \| DXF HSUR4.75/14 front view: DWG \| DXF HSUR4.75/14 top view: DWG \| DXF	None for this model
HSUR4.75/16	HSUR4.75/16: DWG \| DXF HSUR4.75/16 front view: DWG \| DXF HSUR4.75/16 top view: DWG \| DXF	None for this model
HSUR4.75/9	HSUR4.75/9: DWG \| DXF HSUR4.75/9 front view: DWG \| DXF HSUR4.75/9 top view: DWG \| DXF	None for this model
HSUR410	HSUR410: DWG \| DXF HSUR410 front view: DWG \| DXF HSUR410 left view: DWG \| DXF HSUR410 top view: DWG \| DXF	None for this model
HSUR414	None for this model	None for this model
HSUR5.12/11	HSUR5.12/11: DWG \| DXF HSUR5.12/11 front view: DWG \| DXF HSUR5.12/11 top view: DWG \| DXF	None for this model
HSUR5.12/14	HSUR5.12/14: DWG \| DXF HSUR5.12/14 front view: DWG \| DXF HSUR5.12/14 top view: DWG \| DXF	None for this model
HSUR5.12/16	HSUR5.12/16: DWG \| DXF HSUR5.12/16 front view: DWG \| DXF HSUR5.12/16 top view: DWG \| DXF	None for this model
HSUR5.12/9	HSUR5.12/9: DWG \| DXF HSUR5.12/9 front view: DWG \| DXF HSUR5.12/9 top view: DWG \| DXF	None for this model
SUL	None for this model	SUL With Square Cut Joist: DWG \| DXF
SUL1.81/11	SUL1.81-11: DWG \| DXF SUL1.81-11 front view: DWG \| DXF SUL1.81-11 right view: DWG \| DXF SUL1.81-11 top view: DWG \| DXF	None for this model
SUL1.81/14	None for this model	None for this model
SUL1.81/9	None for this model	None for this model
SUL2.06/11	None for this model	None for this model
SUL2.06/9	None for this model	None for this model
SUL2.1/11	SUL2.1/11: DWG \| DXF SUL2.1/11 front view: DWG \| DXF SUL2.1/11 right view: DWG \| DXF SUL2.1/11 top view: DWG \| DXF	None for this model
SUL2.1/9	SUL2.1/9: DWG \| DXF SUL2.1/9 front view: DWG \| DXF SUL2.1/9 right view: DWG \| DXF SUL2.1/9 top view: DWG \| DXF	None for this model
SUL2.37/11	None for this model	None for this model
SUL2.37/14	None for this model	None for this model
SUL2.37/9	None for this model	None for this model
SUL2.56/11	None for this model	None for this model
SUL2.56/14	None for this model	None for this model
SUL2.56/9	None for this model	None for this model
SUL210	SUL210: DWG \| DXF SUL210 front view: DWG \| DXF SUL210 right view: DWG \| DXF SUL210 top view: DWG \| DXF	None for this model
SUL210-2	SUL210-2: DWG \| DXF SUL210-2 front view: DWG \| DXF SUL210-2 right view: DWG \| DXF SUL210-2 top view: DWG \| DXF	None for this model
SUL214	None for this model	None for this model
SUL214-2	None for this model	None for this model
SUL310	None for this model	None for this model
SUL314	None for this model	None for this model
SUL410	SUL410: DWG \| DXF SUL410 front view: DWG \| DXF SUL410 right view: DWG \| DXF SUL410 top view: DWG \| DXF	None for this model
SUL414	SUL414: DWG \| DXF SUL414 front view: DWG \| DXF SUL414 right view: DWG \| DXF SUL414 top view: DWG \| DXF	None for this model
SULI2.06/9	None for this model	None for this model
SULI3510/12	None for this model	None for this model
SULI3514/20	None for this model	None for this model
SUR	None for this model	SURWith Square Cut Joist: DWG \| DXF
SUR1.81/11	None for this model	None for this model
SUR1.81/14	None for this model	None for this model
SUR1.81/9	None for this model	None for this model
SUR2.06/11	None for this model	None for this model
SUR2.06/9	None for this model	None for this model
SUR2.1/11	SUR2.1/11: DWG \| DXF SUR2.1/11 front view: DWG \| DXF SUR2.1/11 left view: DWG \| DXF SUR2.1/11 top view: DWG \| DXF	None for this model
SUR2.1/9	SUR2.1/9: DWG \| DXF SUR2.1/9 front view: DWG \| DXF SUR2.1/9 left view: DWG \| DXF SUR2.1/9 top view: DWG \| DXF	None for this model
SUR2.37/11	None for this model	None for this model
SUR2.37/14	None for this model	None for this model
SUR2.37/9	None for this model	None for this model
SUR2.56/11	None for this model	None for this model
SUR2.56/14	None for this model	None for this model
SUR2.56/9	None for this model	None for this model
SUR210	SUR210: DWG \| DXF SUR210 front view: DWG \| DXF SUR210 left view: DWG \| DXF SUR210 top view: DWG \| DXF	None for this model
SUR210-2	SUR210-2: DWG \| DXF SUR210-2 front view: DWG \| DXF SUR210-2 left view: DWG \| DXF SUR210-2 top view: DWG \| DXF	None for this model
SUR214	None for this model	None for this model
SUR214-2	None for this model	None for this model
SUR310	None for this model	None for this model
SUR314	None for this model	None for this model
SUR410	SUR410: DWG \| DXF SUR410 front view: DWG \| DXF SUR410 left view: DWG \| DXF SUR410 top view: DWG \| DXF	None for this model
SUR414	SUR414: DWG \| DXF SUR414 front view: DWG \| DXF SUR414 left view: DWG \| DXF SUR414 top view: DWG	None for this model
SURI2.06/9	None for this model	None for this model
SURI3510/12	None for this model	None for this model
SURI3514/20	None for this model	None for this model