• Load Table
• Gallery of images
• Code Reports
• Drawings
• Catalog Page
• Related Categories
• Technical Bulletins
• Fliers
• Help for downloads

TJC37 is a versatile connector for jack trusses. Adjustable from 0 to 67.5 degree (shipped with 67.5 degree bend). Nail hole locations allow for easy installation. Minimum nailing option provides faster installation and lower installed cost.

Material: 16 gauge

Finish: Galvanized.

Installation:

• Use all specified fasteners. See General Notes.
• Can be installed filling round holes only, or filling round and triangle holes for maximum values.
• To reduce the potential for splitting, install the TJC37 with a minimum 3/16" edge distance on the chord members (must be centered on 2x4 chords).
• Position the jack truss on the inside of the bend line with the end of the jack truss flush with the bend line.
• Bend the TJC37 to the desired position (one bend cycle only).
• No bevel cut required.
• Applications involving attachment of TJC37 to the carried truss top chord requires minimum 2x6 carrying member for jack truss pitches up to 7/12, and 2x8 or larger for pitches greater than 7/12. 2x4 carried truss top chord allows for pitches from 0/12 to 3/12.